bioBidet A3 - Page 9

4
Remove existing seat and lid.
Release the bolts on both sides of
the existing toilet seat.
2
3
Connect supplied universal 7/8” T
valve to the fill valve underneath of
toilet water tank and connect water
supply hose between universal 7/8”
and shut off valve
3
3
Mount bidet and toilet seat/lid over
toilet mounting holes.
Supplied rubber O-rings should be
placed under the bidet mounting
bracket to protect and secure the
bidet on the toilet.
4
3
5
9
Connect water supply hose
between bidet inlet and universal
T valve
Seat
BIO BIDET A3