bioBidet BB-1000 User Manual (English)

Questions and Answers:

C
Christine KellerJul 28, 2025
What to do if my bioBidet Toilet is not operating?
- E
  Eric HortonJul 28, 2025
  If your bioBidet Toilet isn't operating, there are a few potential causes: * The power may be switched off. If so, switch the power on and check your house's power supply system. * The seat may not be occupied. Make sure someone is sitting on the seat, as the unit has an occupied sensor. * If you have the BB-1000 model, the remote controller's battery might be exhausted. Try replacing the battery.
J
Jennifer RiveraAug 2, 2025
What to do if my bioBidet Toilet is leaking water?
- R
  rodney32Aug 2, 2025
  If your bioBidet Toilet is leaking water, it could be due to a faulty connection. In this case, fix the connections. If the water is leaking from the main unit, it may be a faulty unit.
C
christine51Aug 7, 2025
Why is the washing water not spraying on my bioBidet Toilet?
- M
  Mr. Jose CampbellAug 7, 2025
  If the washing water isn't spraying from your bioBidet Toilet, consider these possibilities: 1. The water tank may not be filled. If this is the case, wait about one minute and then press the desired washing button again. 2. The shut-off valve might be closed. Turn on the shut-off valve. 3. There might be freezing inside the main unit or the water supply pipe. Heat the room for about two hours. Operating the unit while parts are frozen can cause a malfunction.
D
David VasquezAug 11, 2025
How to fix weak water pressure on bioBidet Toilets?
- T
  Tony WilsonAug 12, 2025
  If the washing water pressure is weak on your bioBidet Toilet, here's what you can do: * The water pressure level may be set to “LOW”. If so, set the water pressure to “HIGH.” * The strainer might be clogged. Clean the strainer.
R
Richard LopezAug 17, 2025
Why is the washing water not warm on my bioBidet Toilet?
- J
  Jeanne ThompsonAug 17, 2025
  If the washing water isn't warm on your bioBidet Toilet, it could be because: * The water temperature is set to “LOW”. In that case, set the water temperature to “HIGH.” * Continuous operation has depleted the supply of warm water. Wait about three minutes.

bioBidet BB-1000 Specifications

General

Model	BB-1000
Heated Seat	Yes
Warm Air Dryer	Yes
Water Temperature Control	Yes
Self-Cleaning Nozzle	Yes
Deodorizer	Yes
Nozzle Material	Stainless Steel
Seat Material	Plastic
Drying Fan	Yes
Remote Control	Yes
Power Source	Electric
Nozzle Positions	Adjustable
Type	Bidet Seat
Control Type	Remote Control
Spray Modes	Oscillating, Pulsating
Water Pressure Settings	5 levels
Water Temperature Settings	Adjustable
Seat Temperature Settings	Adjustable

Summary

Important Safeguards and General Cautions

Hazard Definitions and General Precautions

Defines hazard levels (Danger, Warning, Caution) and provides essential general precautions for safe use.

Specific Prohibitions for Safe Operation

Lists critical prohibitions such as unauthorized repair, improper water connection, and use of certain chemicals.

Electrical Safety and Handling Precautions

Operational and Maintenance Safety Guidelines

Cautions Before Installation

Electrical Wiring Requirements

Specifies the need for a grounded GFCI outlet, correct voltage, and user responsibility for proper wiring.

Circuit, Grounding, and Bathroom Safety

Extension Cord Use and Grounding Risks

Product Identification

Main Unit Component Identification

Identifies and illustrates main unit parts for BB-800, BB-900, and BB-1000 models.

Included Package Accessories

Lists and illustrates all accessories provided in the product package for installation and use.

BB-1000 Specific Parts

Highlights components exclusively included with the BB-1000 model, such as the remote control and batteries.

Basic Operation Guide

Basic Control Panel and Remote Overview

Provides a fundamental overview of the control panel and remote functions for basic bidet operation.

Simple Operation Panel Functions

Details the functions and layout of the simple operation panel featured on the BB-1000 model.

Essential Operation Tips

Offers key tips for basic operation, including sensor activation and water reheating procedures.

Detailed Operation Procedures

Initial Setup and Preparation Steps

Guides through initial setup, checking for leaks, powering the unit, and filling the water tank.

Seat Sensor Activation and Deodorizer

Explains correct seat usage for sensor activation and deodorizer fan operation.

Stopping All Operations

Details how to use the STOP button to immediately cease all active bidet functions.

Cleansing Functions: Posterior, Feminine, Turbo

Describes the Posterior, Feminine, and Turbo wash functions, including nozzle extension and spray adjustments.

Turbo Wash Safety and Operation

Warm Air Dryer Usage and Control

Adjusting Water Pressure and Temperatures

Nozzle Position Adjustment Guide

Deodorizer Functionality and Levels

Oscillation Feature and Auto-Setting

Massage (Rhythm Wash) Functionality

Economy Modes for Energy Saving

Manual Nozzle Cleaning Procedure

Chime Sound On/Off Control

Installation Steps

Pre-Installation Cautions

Provides critical warnings before starting installation, emphasizing water connection before electricity.

Step 1: Water Shut-off and Drainage

Details shutting off water supply and draining the toilet tank as the first installation step.

Step 2: Removing Existing Toilet Seat

Explains how to detach the current toilet seat and lid by releasing the mounting nuts.

Step 3: Connecting Water Supply Components

Guides on connecting the T-valve and double check valve to the cistern and water supply line.

Step 4: Assembling the Installation Base

Step 5: Securing Bolts and Nuts

Step 6: Mounting the Bidet Seat

Step 7: Final Water and Power Connections

Deodorizer Cartridge Installation

Remote Control Wall Mounting Guide

Separation of Unit from Toilet Bowl

Power Off and Water Shut-off Procedures

Details the initial steps for unit separation: switching off power and closing the water supply valve.

Draining Water and Detaching the Unit

Explains how to drain remaining water and detach the bidet unit from its installation base.

Maintenance Procedures

Nozzle Cleaning Instructions

Provides instructions for cleaning the bidet nozzle using the Posterior Wash button and a soft toothbrush.

Body of Unit Cleaning Guidelines

Advises on cleaning the unit body with a wet cloth, avoiding harsh chemicals and direct water spray.

Strainer Cleaning Procedure

Details how to clean the water strainer, including shutting off water and unscrewing the filter nut.

Water Draining and Winter Maintenance

Warm Water Tank Draining Process

Explains how to drain the warm water tank for extended periods of non-use.

Winter Season Maintenance Tips

Offers advice for winter maintenance, focusing on preventing freezing and preparing for storage.

Troubleshooting Common Issues

Washing Water Performance Issues

Addresses common problems like no water spray, weak pressure, or insufficient water warmth.

Unit Operation and Leakage Problems

Helps diagnose unit non-operation or water leaks, providing remedies and service contact info.

Seat and Dryer Temperature Troubleshooting

Provides solutions for issues where the seat or dryer is not warm, typically due to settings.

Product Specifications

Comprehensive Model Specifications

Presents detailed technical specifications for BB-800, BB-900, and BB-1000 models, covering various features.

Warranty Information

Limited Warranty Coverage Details

Outlines the limited warranty terms, including coverage periods for parts and labor and manufacturer defects.

Warranty Limitations and Exclusions

Lists conditions not covered by the warranty, such as misuse, improper installation, or acts of God.

Warranty Registration and Voiding Conditions

Explains the process for warranty registration and conditions that will void the warranty.

User Information and Registration

FCC Compliance and Radio Interference

Provides FCC compliance information for digital devices and tips to mitigate radio frequency interference.

Warranty Registration Process

Details the warranty registration procedure, including required information and submission timeframe.

Related product manuals

bioBidet dib Special Edition

bioBidet Discovery DLS

8 pages

bioBidet FLOW X-1000