To Next PageTo Next Page
Need help?Do you have a question about the BioCool BIO Series and is the answer not in the manual?
Manual for BIO evaporative air conditioners using advanced electronic management.
Manual based on current approval state; unit placement in ventilated, dry place for performance.
Installation and maintenance require qualified persons adhering to local regulations.
Perform installation in a suitable place, wear safety clothing, avoid adverse weather.
Maintenance and repair require qualified personnel and adherence to local laws.
Read manual carefully, do not force parts, check placement for weight support.
Diagram illustrating the components of the BIO-180 model with numbered parts.
Diagram showing components of the BIO-18DC-DC model, detailing its parts.
Diagram illustrating the components of the BIO-30 model, identifying all its parts.
Table detailing technical specifications like airflow, capacity, energy consumption for BIO 18 AIV.
Table listing technical specifications for BIO 30 models, including airflow and capacity.
Guidelines for duct installation, including material, dimensions, and speed requirements.
Instructions on how to make a cut in the cover, emphasizing weather conditions and sealing.
Illustrates a roof installation example for BIO 18 and BIO 30 models with duct dimensions.
Detailed diagram of a roof installation for BIO 18, showing structural components and ducting.
Shows a roof installation diagram and lists materials and dimensions for components.
Illustrates a deck installation, including details on roof openings and protective sheets.
Diagram showing a roof installation with minimum distances and support details for BIO units.
Illustrates a frontage installation with support, wall, and distance requirements for BIO units.
Step-by-step guide for assembling internal components of the evaporative unit.
Information on the electrovalve assembly's location, protection, and electrical connections.
Instructions for connecting the drain valve, emphasizing proper discharge and tube usage.
Explains the standard wall control connection and protecting the control wire.
Wiring diagram for BIO 18 AXIAL model, showing connections to the Biocool Control.
Wiring diagram for BIO 18 CENTRIFUGAL FAN, detailing connections to the main board.
Illustrates a water supply scheme with shut-off valves and pipe connections.
Shows wiring diagrams for BIO-18D and BIO-30D models, including C.G.B.T.
Considerations for electrical installation, safety box connection, and wiring regulations.
Table specifying electric cable types and Modbus communication wiring guidelines.
Requirements for water supply, including pressure, pH, type, and hardness impact.
Outlines technical assistance scope for maintenance, including labour for faults.
Importance of routine technical maintenance for efficient operation and potential issues.
Requirements for annual cleaning and disinfection to prevent Legionella.
Checklist of points to review during maintenance operations for equipment condition and compliance.
Step-by-step guide for opening the evaporative unit at the start of the season.
Step-by-step guide for closing down the evaporative unit at the end of the season.
Troubleshooting steps for communication errors and electrical installation guidance.
Guidance on water pH, pipes, pressure, and protection measures for installation.
Link and QR code for the installation manual in Portuguese.
Link and QR code for the installation manual in Italian.
General| Type | Air Purifier |
|---|---|
| Technology | HEPA Filtration |
| Filter Type | HEPA, Activated Carbon |
| Frequency | 60 Hz |
| Features | Timer |
| Airflow | Information not available |
