4. Maintenance and Safety Inspection
NOTE: The Maintenance and Safety Inspection Information is detailed in the Maintenance and
Safety Inspection segment of the NxStep eLearning course.
Disposal
An appropriate waste disposal company is to be contacted (i.e., the local collection point for
waste separation). Properly dispose of the device at the end of its service life:
• The device packaging is disposed of through resource recycling.
• The metal parts of the machine go to scrap metal disposal.
• Plastic parts are disposed of as hazardous waste.
The disposal of equipment must be in accordance with the respective
national regulations.
Wear parts are considered hazardous waste! After being replaced, wear
parts must be disposed of according to country-specific waste laws.
To Next Page
Loading...
