BioHorizons INTRASPIN IS220 - User Manual

Leukocyte- and Platelet-Rich Fibrin
L02065 Rev A AUG 2020

Summary

Indications for Use

Contraindications

Safety Notes

Brief Centrifuge Setup

L-PRF Preparation

Fibrin Matrix Preparation

Protocol #2 L-PRF Plug

Protocol #3- Biomaterial;L-PRF Mixture

Protocol #4- Biomaterial;L-PRF Matrix Mixture

Protocol #5- Biomaterial Hydration

Tissue Regeneration Kit Cleaning and Sterilization

Centrifuge Cleaning and Maintenance

Rotor and Accessories Cleaning and Maintenance

Centrifuge Operating Instructions

13.1 Initial Operation

Steps for the initial setup and preparation before the first use of the centrifuge.

13.3 Emergency Unlocking

Procedure for manually unlocking the centrifuge lid in case of power failure or malfunction.

13.4 Installation and Removal of the Rotor

Detailed steps for installing and removing the centrifuge rotor.

13.6 Direct Input of the Centrifugation Parameters

Method for directly inputting speed (RPM), RCF, and runtime parameters.

13.7 Input of the Centrifugation Parameters with the SELECT Key

Using the 'SELECT' key to input centrifugation parameters like runtime and speed/RCF.

13.9 Centrifugation with Preset Time

Procedure for running the centrifuge with a predetermined time setting.

13.10 Continuous Run

13.11 Short-Term Centrifugation

13.12 Emergency Stop

Procedure for stopping the centrifuge immediately using the emergency stop function.

13.14 Resetting the Cycle Counter to Zero

13.16 Querying System Information

Faults

Change Mains Input Fuses

BioHorizons INTRASPIN IS220 Specifications