Need help?Do you have a question about the Biohort Europa and is the answer not in the manual?
Assemble both sheds as described in the standard assembly manual, omitting specific walls temporarily.
Connect gable plates N preliminarily with crown stayer H at the corners.
Do not assemble screws/fixings connecting roof and crown panels on joined sides at this stage.
Utilize galvanised side stayers for the connection sections between the two sheds.
Align sheds precisely (10cm apart) and assemble roof panels on the extension shed.
Push sheds together, assemble crossbeam Q, using side stayers for support.
Fasten side cover plate S2 to head and floor profiles on the side wall with half corrugation.
Fix the stayer T to the side cover plate S1.
Install cover plate U under the crown cover, securing it with roof and gable plates.
Drill four 4.5mm holes for cover U1 and fasten it to the roof plates.
Drill through prepunched holes to fasten the crossbeam to head profile and gable plate.
Adhere to maximum roof load of 150kg/m² and provide crossbeam support during winter.
General| Type | Metal shed |
|---|---|
| Door type | Double |
| Roof type | A-frame roof |
| Roof color | Green |
| Roof material | - |
| Number of doors | 2 door(s) |
| Integrated floor | Yes |
| Number of windows | 1 |
To Next Page
