Need help?Do you have a question about the Biolin Scientific QSense and is the answer not in the manual?
Highlights the key features and capabilities of the QSense High Temperature Chamber.
Lists essential safety requirements to avoid injury and equipment damage.
Details how to carefully unpack and check the QSense QHTC 101 for any damage.
Guides the user through the process of installing the QSoft401 software on the PC.
Covers the physical installation of the QHTC 101 chamber, including environmental aspects and connections.
Confirms successful installation of the instrument and software.
Explains how to enable and manage automatic updates for the QSoft401 software.
Provides instructions for cleaning the electronics unit and chamber platform.
Highlights important aspects for preparing sample liquids for high-temperature measurements.
Details the typical setup for experiments, including chamber and flow module configuration.
Provides a step-by-step procedure for conducting a measurement with the QHTC 101.
Outlines the procedures for cleaning the flow modules after completing a measurement.
Details additional safety precautions required when using flammable sample liquids.
Introduces various optional modules that can be used with the QCM-D instrument.
Describes the main window of QSoft 401 where temperature control is accessed and set.
Explains how to program temperature changes during a measurement in QSoft 401.
Guides the installation of QSoft401 software and necessary USB drivers.
Explains how to manage automatic software updates for QSoft401.
Covers setting up measurements, including finding resonances and temperature programming.
Details managing data acquisition, viewing charts, using curve tools, and exporting data.
Describes tools like preacquisition forms, calibration, and about information.
Lists chemical compatibility ratings for materials used in QSense components.
Outlines the process for contacting Biolin Scientific for product support.
Provides instructions on how to safely return equipment for service or repair.
Specifies the recommended operating temperature and environmental conditions.
Details the electrical requirements and power usage of the QHTC 101 system.
Lists the PC requirements and software compatibility for the QSense system.
Describes sensor specifications and sample handling volumes.
Outlines the frequency range and time resolution of measurements.
Presents performance data for different measurement modes (e.g., Low Noise, High Speed).
Provides physical dimensions and weight of the electronics unit and measurement chamber.
General| Brand | Biolin Scientific |
|---|---|
| Model | QSense |
| Category | Climate chamber |
| Language | English |
To Next Page