Need help?Do you have a question about the BioLogic BCS-8 Series and is the answer not in the manual?
Guide to understanding the instrument's installation and configuration.
Detailed overview of BCS-COM, BCS-805, BCS-810, BCS-815, BCS-PDU, and Power Strip.
Information on cabinet sizes, module compatibility, and mixing within cabinets.
Overview of BT-Lab® software capabilities for battery testing and data analysis.
Steps for preparing physical installation, safety shutdown, ventilation, and electrical plugs.
Instructions for safely unpacking and inspecting BCSC-38U and BCSC-24U cabinets.
Guidelines for installing BCSC cabinets, including electrical requirements.
Wiring diagrams for European and North American PDU models for electrical connection.
Details on connecting power supplies to BCS-COM, BCS-815, and BCS-PDU modules.
Procedures for connecting BCS-COM to modules and the computer via Ethernet.
Step-by-step guide for installing the BT-Lab® software on a PC.
Instructions for PC setup, including TCP/IP installation and network configuration.
Setting up network parameters for Ethernet connection between PC and instrument.
Steps to connect the instrument to the computer using BT-Lab® software.
How to allow the software to communicate through the Windows Firewall.
Description of cell cables for BCS-815 module and their connection to the front panel.
Details on cell cables for BCS-805/810 modules and their connection requirements.
Information on available battery holders for connecting batteries to BCS-8xx modules.
Explains how to connect channels to cells using standard cables for 2- and 4-electrode setups.
Explains DC and AC modes, including sine generator functionality for EIS.
How to use K-type thermocouples for temperature measurement and recording.
Using the software without a connected instrument for interface familiarization.
Procedure for updating or reverting the instrument's firmware via BT-Lab®.
Checking ventilation grids and replacing fuses with correct ratings for safety.
Graphical representation of maximum power delivery based on cable length and temperature.
Detailed electrical requirements and parameters for different BCS-8xx models.
Size and weight information for BCS modules and cabinets.
Operating conditions, safety, EMC, and RoHS compliance details.
Specific technical data for BCS-815, BCS-810, BCS-805, and BCS-COM modules.
Minimum hardware and software specifications for the controlling computer.
Verifying EIS, DC functions, and calibration using dummy cells and BCS-Cal.
Solutions for data saving errors and lost PC-instrument connection.
How PC power saving settings can affect data recording during experiments.
Split-phase diagrams for European and North American PDU power distribution.
Detailed electrical schematics for USA/CAN and European PDU models.
Reference table for electrical symbols used in the schematics.
General| Brand | BioLogic |
|---|---|
| Model | BCS-8 Series |
| Category | Industrial Equipment |
| Language | English |
To Next Page