20 | P a g e
code will not be included with the tag ID. The default for
this setting is ‘ON’.
DILIMITR – Options are ‘SPACE’, ‘NONE’, ‘.’, ‘TAB’, ‘;’, or ‘,’.
This setting sets the character that is displayed between
the data fields (tag ID, date and time) when tag
information is downloaded. The default is ‘.’.
NOTE: Some PC programs require the delimiter format to
be a specific character.
1st CHAR – Options are ‘NONE’, ‘#’, ‘L’, ‘X’, ‘G’. This setting
will add the selected character to the beginning of a tag
ID field when downloaded. The default for this setting is
‘NONE’.
TAG-TYPE – Options are ‘NONE’, ‘ALLFLEX’, ‘TI-RFID’. This
setting sets character fields. The default for this setting is
‘NONE’.
4.7 Reader Info
This submenu displays the Readers current software and hardware
versions. The software version is listed following the ‘SW’. The
Hardware version is listed following the ‘HW’.
To Next Page
Loading...