BioMax N-UFACE302 - Configure RS232 & Printer Settings; Set Date & Time; Select LAN;WAN Mode; Connect Wi-Fi

6 pages

To Next Page

To Previous Page

18. How to set Attendance status?

Ans:- Menu >> Select Setting >> Select Device >> Select ATND. Status-Yes >> Set Attendance

status.

19. How to set RS232 & printer settings?

Ans:- Menu >> Select Setting >> Select Device >> Select RS232 - Yes >> Select Printer Settings &

Set Baudrate and Cutter.

20. How to set Date & Time?

Ans:- Menu >> Select Setting >> Select Device >> Select Time >> Set Date & Time.

21.By Default Device Port Number?

Ans:- 5005

22. How to select LAN/WAN mode in device?

Ans:- Menu >> Select Setting >> Select Network >> Change mode LAN/WAN.

23. How to find Cloud ID?

Ans:- Menu >> Select Setting >> Select Network >> Get the Cloud ID.

24. How to change & check the IP address of device?

Ans:- Menu >> Select Setting >> Select Network >> Select ETH - Yes >> Change & Check the IP

Address.

25. How to Connect Wi-Fi?

Ans:- Menu >> Select Setting >> Select Network >> Select Wi-Fi - Yes >> Select Search >> Select

Wi-Fi router name >> Add router password >> Ok.

26. How to Connect Mobile Net?