To Next PageTo Next Page
Need help?Do you have a question about the Biomomentum Mach-1 and is the answer not in the manual?
Describes the components of the Mach-1 Micromechanical System.
Explains the Mach-1 Motion software and its functions.
Defines key terms used within the Mach-1 Motion environment.
Guides through the process of installing the Mach-1 Motion software and drivers.
Covers software interface elements and general system information.
Explains how to set the data sampling rate for stages and load cells.
Selects the stage axis for manual control operations.
Sets manual control speed for stage movement.
Utilizes buttons for manual stage displacement and power control.
Finds and sets the axis midpoint as a reference point.
Controls the power status of stage motors.
Details the procedure for calibrating load cells with known weights.
Covers snapshot, recording, and settings for the camera feed.
Details parameters for studying deformation under constant load.
Explains detecting sample surface or bottom with stage movement.
Details stage repositioning after reaching contact criteria.
Describes moving the stage to a specific absolute position.
Explains moving the stage by a specified relative amplitude.
Details surface detection and testing via indentation.
Describes ramp and release routines for stage movement.
Explains executing ramp, relaxation, and release sequences.
Describes moving stages to predefined positions for automated scanning.
Explains executing precise sinusoidal displacements.
Details ramp-hold displacements for stress relaxation tests.
Acquires data without activating motors for a specified duration.
Sets load cell and stage position readings to zero.
Guides on how to save test data to files.
Provides information on automatic acceleration/deceleration settings.
Describes adding, deleting, and reordering functions within a sequence.
Details how to start, run, and interrupt a defined sequence.
Configures communication parameters between computer and controller.
Details PID parameters and their effect on servo loop performance.
Describes regular cleaning procedures for the system's exterior and components.
Steps to prepare the system before starting a test session.
Procedures for cleaning the system and accessories after use.
General| Brand | Biomomentum |
|---|---|
| Model | Mach-1 |
| Category | Test Equipment |
| Language | English |
