Need help?Do you have a question about the Bionet Cardio 7 and is the answer not in the manual?
General| Printing | Thermal printer |
|---|---|
| Data Storage | Internal memory, USB |
| Power Supply | AC 100-240V, 50/60 Hz |
| ECG Monitoring | Yes |
| Battery Life | Up to 4 hours |
| Display | 7-inch color LCD |
| Connectivity | USB, Ethernet, Wi-Fi |
| Weight | 2.8 kg |
| SpO2 Monitoring | Yes |
| NIBP Monitoring | Yes |
| Temperature Monitoring | Yes |
| Respiratory Rate Monitoring | Yes |
| ECG Channels | 12-channel |
| Channels | 12-channel |
Overview of the Cardio 7 ECG device and its key functionalities.
Details the main components and accessories included with the Cardio 7.
Covers installation precautions and procedures for the Cardio 7 system.
Outlines product warranty and detailed technical specifications of the Cardio 7.
Guides users through diagnosing and resolving power-related issues.
Addresses problems related to ECG waveform printing and diagnosis interpretation.
Provides solutions for common problems with ECG diagnosis interpretation.
Explains the different filter options for ECG signal processing.
Offers flowcharts for diagnosing and resolving system malfunctions.
Covers LCD backlight configuration and lead fault detection procedures.
Illustrates how to access and adjust filter settings via the system setup menu.
Presents the electrical circuit layout and external views of the Cardio 7.
Specifies the physical size and weight of the Cardio 7 unit.
Identifies and describes the main internal modules of the Cardio 7.
Illustrates the internal wiring and cable connections within the Cardio 7.
Step-by-step guide for removing the top cover of the Cardio 7.
Detailed steps for replacing the printer module.
Instructions for replacing the main base board of the Cardio 7.
Procedure for replacing the SMPS (power supply) module.
Guides on replacing the key board assembly.
Guides on replacing the LCD display unit.
Instructions for safely replacing the device's battery.
Outlines the general steps for reassembling the Cardio 7.
Lists and identifies internal components that can be replaced.
Catalog of standard and optional accessories for the Cardio 7.
Details pin assignments for patient and spirometry connectors.
Shows component layouts for Base, UI, and CPU printed circuit boards.
Covers preparation and steps for updating Cardio 7 software.
Instructions for configuring system integration settings.
To Next Page
