12/20 v2 03-13-2020
whirlwinds. Avoid flying nearby a road, or water, where it
could fall by accident.
A: Turn on / automatic binding
Turn the transmitter ON (power button) first.
The blue LED indicators lights up and starts flashing.
Then turn MetaFly ON. MetaFly will bind automatically to
its transmitter (LED constant).
NOTE: If MetaFly doesn't bind (LED flashing slowly),
read chapter III – “BINDING METFLY”.
B - Adjusting the tail - MetaFly flying speed
The tail angle is adjustable (5 notches), making possible
to adjust the flying speed of MetaFly. To change the
notch, just push or pull the base of the tail.
* For indoor flights, in a confined space, or for slow
flights: set the tail in a high position (choose 5 or 4)
* For outdoor flights, in a big space or for fast flights:
adjust the tail in a low position (1 to 3).
To Next Page
Loading...