15/20 v2 03-13-2020
Each wing is equipped with a ballast. Its base position is
nearest to the body. It can slide toward the end to create
a ballast differential between the 2 wings.
You must increase the ballast of the opposite wings to
the turning side you observed. For instance, If MetaFly
tends to turn to its right side, move ballast of its left wing
toward the end and leave the one on the right wing
unchanged (base position).
Try flying the MetaFly again, and if necessary, repeat the
process until you get a straight flight or an acceptable
slight turn. Your MetaFly is now balanced and its
performance is optimized.
NB: Flying with tail set in a high (5) or low (1) position
may require a different wing adjustment.
In order to fly the MetaFly with tail in high position in a
confined space and keep a precise control, it is
recommended to do a very precise wing adjustment with
the tail in that position.
VII – PARTS REPLACEMENT
Please refer to the “assembling your MetaFly” section.
Please contact our customer's service to get
To Next Page
Loading...