Need help?Do you have a question about the BionX PL250HT SL XL and is the answer not in the manual?
Lithium Manganese battery specifications, removable and lockable, 4-5h charge time, XL model.
DC rear hub motor, 250W/350W, 9Nm/40Nm torque, brushless, gearless, SL motor.
Removable G2 console with LCD, 4 assist/generate levels, backlight, cycle computer functions.
Slide console into mount until it clicks securely.
Push release lever on mount and slide console out.
Place battery in docking station, slide down rail, ensure lock cylinder clicks.
Turn off system, press release arm, insert key, turn clockwise to unlock and remove.
Use only BionX power supply. Keep away from water. Do not use damaged power supplies.
Details on four assistance levels (35%-300%) and their corresponding riding situations.
Details on four generation levels for recharging the battery during descents.
Overview of console buttons: Power, Key, Cycle, State of Charge Indicator.
Instructions for powering the system on via key or power button, and turning it off.
Guide on using +/- keys for assist levels and the mode key for continuous generate mode.
Procedure to turn on and off the display backlight and integrated bicycle light.
How to cycle through and view Trip Distance, Odometer, Average Speed, and Chronometer.
Instructions to reset distance, chronometer, and average speed values to zero.
Steps to enter programming mode by pressing specific buttons until '0000' appears.
Code 2001: Select speed unit using +/- buttons and confirm.
Code 2002: Adjust regeneration/brake output from 0-40.
Code 2005: Set tire size in millimeters by adjusting digits.
Code 2009: Set display orientation (0=left, 1=right side of console).
Steps to remove the rear wheel, including unplugging cables and loosening axle nuts.
Steps to install the rear wheel, ensuring proper alignment and tightening axle nuts to 40Nm.
Check battery charge, insertion, and wiring harness connections.
Verify battery to motor cable connections.
Likely brake switch issue; try power cycle or bypass console connection.
Ensure rear axle nuts are tightened to the specified torque (40Nm/30lb-ft).
Follow charging instructions, allow cooling, recharge, or deplete and recharge.
Covers BionX propulsion system for two years, excluding other bicycle components.
Excludes damage from external influences, misuse, unauthorized repairs, and specific battery conditions.
To Next Page
General
