To Next PageTo Next PageHow to fix Biostar A320MH Motherboard when it only boots from optical drive?
If your Biostar Motherboard system only boots from an optical drive, but hard disks can be read, back up data and application files. Then, reformat the hard drive and re-install applications and data using backup disks.
Why Biostar A320MH Motherboard system cannot boot after installing a second hard drive?
If your Biostar Motherboard system cannot boot after installing a second hard drive, set the master/slave jumpers correctly. Then, run the SETUP program and select the correct drive types. You may also call the drive manufacturers for compatibility with other drives.
What to do if Biostar Motherboard shows 'Invalid Configuration' error?
If your Biostar Motherboard shows an 'Invalid Configuration' or 'CMOS Failure' message, review the system’s equipment and ensure the correct information is in the setup.
What to do if Biostar Motherboard has no power?
If there is no power in your Biostar Motherboard system, make sure the power cable is securely plugged in. If it is, try replacing the cable. If the problem persists, contact technical support.
What to do if Biostar Motherboard system is inoperative but lights are on?
General| Form Factor | Micro ATX |
|---|---|
| Chipset | AMD A320 |
| CPU Socket | AM4 |
| Memory Slots | 2 x DIMM |
| Max Memory | 32 GB |
| Video Outputs | 1 x HDMI, 1 x VGA |
| LAN | Realtek RTL8111H Gigabit LAN |
| Memory Speed | DDR4 1866/2133/2400/2667 MHz |
Details the technical specifications of the motherboard components.
Step-by-step guide to installing the CPU into the socket.
Instructions for installing CPU heatsink (Type A and Type B).
Guide for installing DDR4 memory modules into DIMM slots.
How to access and use the BIOS Setup program.
Detailed steps for updating BIOS using BIOSTAR utilities.
System shuts down due to CPU overheating protection.
