Biostar H410MH S2 User Manual

Chapter 2: Hardware installaon | 9
H410MH S2
2.2 Install a Heatsink
Step 1: Place the CPU fan assembly on top of the installed CPU and make sure that the four
fasteners match the motherboard holes. Orient the assembly and make the fan cable is closest
to the CPU fan connector.
Step 2: Press down two fasteners at one me in a diagonal sequence to secure the CPU fan
assembly in place. As each fastener locks into posion a click should be heard.
Note
»
 ApplythethermalinterfacematerialontheCPUbeforeheatsinkinstallaon,ifnecessary.
»
 DonotforgettoconnecttheCPUfanconnector.
»
 Forproperinstallaon,pleasekindlyrefertotheinstallaonmanualofyourCPUheatsink.

Biostar H410MH S2 Specifications

General

Brand	Biostar
Model	H410MH S2
Category	PCI Card
Language	English