USER MANUAL
9
BirdOne
Attach the console with handlebars to the
neck of your Bird so that the headlight faces
forward. Then, use the wrench to secure the
four screws in the holes below the console.
STEP ONE: ASSEMBLY STEP TWO: CHARGING
Once you’ve assembled your Bird, it’s time to
charge. Use the included power supply and
connect it to the charging port. Do not charge
your Bird if either your Bird’s charging port or
power supply are wet. If either are wet, wait for
them to dry and then begin charging.
Once assembled and charged, your Bird One is
ready to be paired with the Bird app.
To Next Page