CONNECT THE POWER ADAPTER
Once you’ve assembled your Bird One, it’s
time to charge. Use the included power supply
and connect it to the charging port.
1
FINISH CHARGING
When fully charged, a green light on the
power supply indicates the charge is
complete. Disconnect the power supply from
the charging port before riding.
2
Charging
3
Do not attempt to charge if the charging port or power adaptor is wet.
WARNING:
WARNING:
Ambient temperature must be 32-104°F (0-40°C)″ during charging.
The battery will not charge outside of these temperature limits.
WARNING:
Risk of Fire: Do not attempt to disassemble the charger.
No user serviceable parts.
To Next Page
Loading...
