Need help?Do you have a question about the birddog EYES P200 and is the answer not in the manual?
General| Brand | birddog |
|---|---|
| Model | EYES P200 |
| Category | Security Camera |
| Language | English |
Details legal and trademark information for the manual.
Provides legal disclaimers and initial user attention points regarding account security.
Covers critical safety instructions for installation, operation, and equipment maintenance advice.
Outlines compliance with FCC, CE, and WEEE directives for the equipment.
Lists the camera's resolutions, zoom, video outputs, and control interfaces.
Identifies and describes all physical connection ports on the camera.
Explains the function of each button on the infrared remote controller.
Details how to connect the camera and its power sources (DC adapter or PoE).
Describes how to obtain video signals via different output types like HDMI, SDI, IP, and CVBS.
Shows information displayed on camera startup for 5 seconds.
Lists methods for controlling the camera: IR, RS-232, RS-422/485, NDI.
Explains the use of audio ports for microphone and speaker connections.
Provides detailed instructions for RS232 connections and multi-camera daisy-chaining.
Details VISCA RS422 setup and cable connections for single cameras.
Explains RS422 wiring for SONY and other VISCA controllers, including daisy-chaining.
Covers setting up RS485 control and configuring the camera for PELCO P/D.
Explains how to control multiple cameras using different serial protocols.
Details the communication protocols and IP addresses for VISCA over IP control.
Explains how to use the rotate DIP switches for video format settings.
Details settings for camera ID, video output, and serial communication via bottom DIP switches.
Guides users on how to access and navigate the camera's on-screen menus.
Explains the FULL AUTO and MANUAL exposure modes and their parameters.
Details settings for shutter speed, gain limits, and exposure compensation.
Describes the different white balance modes available for the camera.
Explains specific white balance modes like ATW, USER, and various lamp modes.
Covers settings for sharpness, noise reduction, color, and contrast for Picture 1.
Details digital zoom activation and manual focus speed adjustments.
Explains how to configure pan/tilt speeds, limits, and orientation.
Covers system settings like PELCO ID, IR reception, display info, and factory reset.
Provides step-by-step instructions for controlling camera movement and zoom.
Explains how to use the HOME button to reset the camera's pan/tilt position.
Guides on how to select and control different cameras using the remote.
Details manual and auto focusing, plus the backlight compensation feature.
Explains how to save and retrieve camera settings using the preset function.
Details how to cancel stored presets and switch between video resolutions.
To Next Page
