Need help?Do you have a question about the birddog PTZ KEYBOARD and is the answer not in the manual?
General| Compatibility | BirdDog PTZ Cameras |
|---|---|
| Display | LCD |
| Power | 12V DC |
| Connections | Ethernet, RS232, RS422, RS485 |
| Protocols | NDI, VISCA, Pelco P/D |
Crucial safety instructions for installation, operation, and maintenance to prevent damage or injury.
Manual and auto adjustments for White Balance, Exposure, Iris, Shutter, and Focus.
Details powering the controller via included adapter, PoE, or the junction box.
Adds ONVIF cameras by manually entering IP address, username, and password.
Setting up port forwarding rules at the camera's network location for WAN access.
Configuring the keyboard and network for WAN communication with cameras.
Steps for manual addition and network discovery of VISCA over IP cameras.
Instructions for configuring VISCA over IP camera control over a Wide Area Network (WAN).
Methods to access and navigate camera OSD menus for non-IP and IP-based cameras.
Steps for setting, saving, calling, and clearing camera presets.
Manual and auto adjustments for Iris/Shutter, White Balance, and Focus using dedicated controls.
To Next Page
