To Next PageTo Next PageHow to fix reduced or no spray in Bissell Vacuum Cleaner?
If your Bissell Vacuum Cleaner has reduced spray or no spray, the Clean Water Tank might be empty. Refill it. The Clean Water Tank may not be seated completely; turn the power OFF, then remove and reseat the tank. The pump may have lost prime in hose cleaning mode; hold the end of the hose below the water level in the tank to prime it.
Why does my Bissell 3071 Vacuum Cleaner have no power?
If your Bissell Vacuum Cleaner has no power, first, ensure you're pressing the power button on the left side of the machine, not mistaking the cleaning mode switch for the power button. Also, check if the outlet is active by plugging in another device.
What to do if my Bissell 3071 Vacuum Cleaner has reduced spray or no spray?
If your Bissell Vacuum Cleaner has reduced or no spray, the Clean Water Tank might be empty, so refill it. Ensure the Clean Water Tank is completely seated by turning the power OFF and reseating the tank. If in hose cleaning mode, the pump might have lost prime, so hold the end of the hose below the water level in the tank to prime it.
How to fix a leaking Clean Water Tank on my Bissell 3071?
If your Clean Water Tank is leaking, it might be overfilled. Ensure the tank has the correct amount of water and formula. With the cap tightly on, hold the tank at an angle over a sink or drain to allow any extra water to pour out. Wipe the tank dry with a cloth. Also, water may be caught in space between the tank and the tank’s handle.
What to do if my Bissell 3071 has no spray through the hose and tool?
If there is no spray through the hose and tool of your Bissell Vacuum Cleaner, the hose to your machine may not be primed. With the machine OFF and unplugged, remove the nozzle from the foot. Place a ballpoint pen in the black cylinder next to the screw. When water bubbles up, remove the pen. Reassemble the nozzle and hose.
How to fix a leaking Dirty Water Tank on my Bissell Vacuum Cleaner?
If the Dirty Water Tank is leaking, the tank ring may not be installed properly. Remove the tank, then remove and reinstall the tank ring.
What to do if my Bissell 3071 Dirty Water Tank is leaking?
If the Dirty Water Tank of your Bissell Vacuum Cleaner is leaking, the tank ring might not be installed properly. Remove the tank, then remove and reinstall the tank ring.
Why is my Bissell Vacuum Cleaner losing suction power?
Several factors can cause a loss of suction power in your Bissell Vacuum Cleaner. The tanks might not be seated correctly, so pick up both tanks and reseat them properly. The Dirty Water Tank may be full, so empty it if it has reached the full line. Check the Clean Water Tank and refill it if empty. Ensure the rubber tab on the Dirty Water Tank is sealed tightly and that the Accessory Hose Door is closed securely. The nozzle may be clogged, so use the Nozzle Clean Out Tool. Finally, make sure the nozzle is installed correctly; if not, remove and reinstall it.
Why is there no power in my Bissell Vacuum Cleaner?
If your Bissell Vacuum Cleaner has no power, first make sure you are pressing the power button on the left side of the machine, and not mistaking the cleaning mode switch for the power button. Also, the outlet may not be active, so try plugging in a different device to test the outlet.
What to do if there is no spray through the hose and tool on my Bissell Vacuum Cleaner?
If your Bissell Vacuum Cleaner hose and tool aren't spraying, the hose to your machine is not primed. With the machine OFF and unplugged, remove the nozzle from the foot. Place a ballpoint pen in the black cylinder next to the screw. When water bubbles up, remove the pen. Reassemble the nozzle and hose.
General| Model Number | 3071 |
|---|---|
| Voltage | 120 V |
| Filtration | Multi-Level Filtration |
| Form Factor | Upright |
| Type | Upright |
| Power Source | Corded |
| Included Tools | Crevice Tool |
| Surface Recommendation | Carpet |
| Color | Onyx Blue |
Details of the limited warranty period and how to obtain service.
Procedure for removing, emptying, cleaning, and reinstalling the dirty water tank.
Detailed steps for replacing the cogged belt, flat pump belt, and brush rolls.
Diagnosing and resolving problems related to spray output.
Troubleshooting spray issues when using the hose and tool attachment.
