EasyManua.ls Logo

Bissell SPINWAVE 2240F - Quick Start Guide Manual

Bissell SPINWAVE 2240F
2 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Press power on a fully charged unit - a full blue light will turn on
o If only part of the light turns on and the pads spin then turn off, the machine need to
be charged (When plugged in the blue indicator light flashes and fills until fully charged, if not test a
different working outlet)
If the pads don't spin and the light is blinking, this indicates the pads stopped spinning from:
o Pushing down or stepping on the foot
o Using on carpet or rugs
o Using without pads on bare floors
Recline machine within 10 seconds - power turns off after 10 seconds when upright to save battery
power
Hold spray button
If it is not charging:
Unplug machine
Run hand along entire length of power cord, it should be smooth
Check plug for damage
o If either the cord (not smooth or exposed wires) or plug (prongs) are damaged, visit a BISSELL
Authorized Service Center or Contact Us

Other manuals for Bissell SPINWAVE 2240F

Related product manuals