M
Mark HarringtonAug 9, 2025
What to do if Bissell Vacuum Cleaner shows low water?
- DdillonmeganAug 9, 2025
If your Bissell Vacuum Cleaner indicates low water, turn it OFF, remove the water tank, fill it, and then resume cleaning.
To Next PageTo Next PageWhat to do if Bissell Vacuum Cleaner shows low water?
If your Bissell Vacuum Cleaner indicates low water, turn it OFF, remove the water tank, fill it, and then resume cleaning.
How to fix Bissell SPINWAVE 3115 Vacuum Cleaner brush roll if it's stuck?
If the brush roll on your Bissell Vacuum Cleaner is stuck, turn the robot OFF and remove any hair or debris from the brush roll.
What to do if Bissell SPINWAVE 3115 edge cleaning brushes are stuck?
If the edge cleaning brushes on your Bissell Vacuum Cleaner are stuck, turn the robot OFF and remove any hair or debris from the edge cleaning brushes.
How to unblock the front caster wheel sensor on Bissell SPINWAVE 3115?
If the front caster wheel sensor on your Bissell Vacuum Cleaner is blocked, turn the robot OFF, remove the front caster wheel assembly, clear any debris from the assembly housing, and then reinstall the wheel.
What to do if Bissell SPINWAVE 3115 Vacuum Cleaner robot is trapped or cliff sensors are dirty?
If your Bissell Vacuum Cleaner robot is trapped, lifted, or the cliff sensors are dirty, place the robot on the floor away from objects and resume cleaning. If the error continues, turn the robot OFF and use a dry cloth to clean the three cliff sensors on the bottom of the robot.
General| Model Number | 3115 |
|---|---|
| Cordless | Yes |
| Battery Type | Lithium-ion |
| Run Time | 20 minutes |
| Water Tank Capacity | 28 oz |
| Charging Time | 4 hours |
| Warranty | 1 Year |
| Included Accessories | 2 Soft Surface Microfiber Pads, 2 Scrubby Microfiber Pads, 8 oz Multi-Surface Formula |
