Bissell SPOT CLEAN User Manual

SPOT
CLEAN
QUICK START GUIDE
PRODUCT PARTS
WARNING:
Refer to the enclosed user
guide for complete instructions
and important safety notices.
Carry Handle
Power Button
3” Tough
Stain Tool
Flex
Hose
Dirty
Water Tank
Formula
& Clean
Water Tank
Power Cord
Quick Release™
Cord Wrap
WE CAN’T WAIT TO
HEAR FROM YOU!
Rate this product and let us
(and millions of your closest
friends) know what you think!
Visit your retailer’s
website or www.bissell.com.

Bissell SPOT CLEAN Specifications

General

Brand	Bissell
Model	SPOT CLEAN
Category	Vacuum Cleaner
Language	English

Summary

Product Parts

Assembly

Connect Hose and Grip

Connect the flex hose clip to the machine and snap the hose grip bracket.

Attach Cord Wrap

Attach the cord wrap to the dirty water tank side and wrap the power cord.

Quick Prep Steps

Hose and Tool Setup

Unwrap the hose and select the desired tool, attaching it to the hose.

Tank Filling Procedure

Remove the tank, fill with hot water and formulas to marked lines, and replace stopper.

Final Connection

Replace the tank, release the cord, plug in the machine, and prepare to spot clean.

Guidelines to Spot Clean

Apply Cleaning Formula

Hold the tool above the soiled surface and spray cleaning formula.

Scrub and Suction Dirt

Gently scrub the area, then apply pressure to suction dirt and formula until clean.

Cleaning Formula Recommendations

Use Genuine BISSELL Formulas

Always use genuine BISSELL formulas to avoid machine damage and warranty voiding.

Recommended Formulas

BISSELL 2X Portable Machine Spot & Stain Formula and OxyGen Boost Formula.