Why does my Bissell SPOTBOT 2114 have no suction?
If your Bissell Vacuum Cleaner has no suction, there might be a few reasons: * The tank could be full, so empty the tank. * The dirty water/collection tank latch might not be down; push it down securely into place. * The black valve on the dirty water/collection tank could be missing; replace it.
What to do if my Bissell Vacuum Cleaner will not run?
If your Bissell Vacuum Cleaner won't run, consider these potential causes: 1. The power cord may not be plugged in, so check the electrical plug. 2. A fuse might be blown or a breaker tripped; replace the household fuse or reset the breaker. 3. The hose may not be removed from the receiver; remove the hose. 4. The SpotBot® may have shut off automatically; press the Pause/Resume button to resume manual cleaning.
How to fix a Bissell SpotBot® Vacuum Cleaner that will not run?
If your Bissell SpotBot® Vacuum Cleaner isn't running, there are a few things to check: * Make sure the power cord is properly plugged in. * Check for a blown fuse or tripped breaker and replace or reset it. * Ensure the vacuum flex hose is securely snapped into place.
What to do if my Bissell SPOTBOT 2114 Vacuum Cleaner has reduced spray?
If your Bissell Vacuum Cleaner has reduced or no spray, it could be due to a few reasons: * The clean water/solution tank might be empty; refill it. * The clean water/solution tank might not be properly inserted; gently press it until you see bubbles from the base.
Why is there reduced or no spray from my Bissell SPOTBOT 2114?
If your Bissell Vacuum Cleaner has reduced or no spray, here are some possible causes and solutions: * The spray tip on the Tough Stain brush might be clogged; clean the spray tip. * The clean water/solution tank might be out of fluid; fill the tank. * The clean water/solution tank might not be inserted securely; gently press the tank until you see bubbles coming from the base. * The tank might be full; empty it. * The dirty water/collection tank latch might not be down; push the latch down securely.
General| Color | grapevine purple/titanium, purple |
|---|---|
| Water Tank Capacity | 30 ounces |
| Cord Length | 16 feet |
| Hose Length | 56 inches |
| Pet Mode | yes |
| ?leaning Area | 3 inches |
| Voltage | 120 volts |
| Current | 3 amperes |
Weight and Dimensions| Length | 9 inches |
|---|---|
| Height | 13.5 inches |
| Width | 17 inches |
| Net Weight | 12.5 pounds |
Explains grounding for electrical safety and proper outlet connection.
Identifies and lists all parts of the deep cleaner with numbered labels.
Explains the control panel functions and selection of cleaning cycles.
Details vacuum hose, spray trigger, scrubbing brushes, and suction nozzles.
Covers tough stain brush storage and the cleaning window indicator.
Lists available BISSELL cleaning formulas and their specific uses.
Provides details about key ingredients in certain BISSELL formulas like Oxy Boost.
Step-by-step guide for filling the clean water/solution tank with water and formula.
Includes crucial tips on water temperature, formula addition, and Boost usage.
Essential advice before starting automatic cleaning cycles, like dry vacuuming.
Explains the Quick Clean, Deep Clean, Hose/Tool options, and Stop/Done functions.
Guides on testing for colorfastness and preparing for manual cleaning.
Details the process of placing the unit and starting hands-free cleaning cycles.
Step-by-step instructions for manual cleaning using the hose and tough stain brush.
Covers post-cleaning actions, rinsing, drying, and general cleaning tips.
Instructions for emptying tanks, cleaning the unit, and proper storage methods.
Outlines the terms, duration, and coverage of the product's limited warranty.
Lists specific conditions and uses that are not covered by the warranty.
Provides contact details for seeking service, repairs, or warranty assistance.
To Next Page