Bit4id tokenME User Manual

3
1. Introduction
This document was written to illustrate the use of tokenME FIPS and tokenME CC (thereafter
tokenME) and contains the documentation about the hardware specifications and special
features.
tokenME has been implemented to be integrated into a large number of application and
scenarios concerning digital signature and authentication into PKI infrastructures (Public Key
Infrastructures). The device is totally driverless and needs no installation (on Microsoft
platforms starting from Vista) to make it work.
Bit4id has made available a “configurator” that allow to use the digital identity into various
applications just by following the simple wizard once started the application.
2. Inserting the Device
tokenME has to be inserted into the host PC as shown in Figure 1.
Figure 1
Once inserted the OS will recognise two devices that can be identified following the path
“Start>Devices and Printers”. In this window two icons will be shown: Smart Card and
TokenME (please refer to figure 2).

Bit4id tokenME Specifications

General

Brand	Bit4id
Model	tokenME
Category	Control Unit
Language	English