SAFETY INFORMATION:
DO NOT expose this product to heat sources (including fire or direct sunlight)
DO NOT expose this product to water or liquids.
If the LED Pulse encounters any liquid, immediately unplug the product from any connected
power sources or devices.
DO NOT disassemble or modify the LED Pulse – this could cause risk of injury, death or damage to property.
Avoid dropping the LED Pulse (or any other heavy impact which might damage the internal circuit)
Avoid cleaning this product using liquids or chemical substances (use a dry cloth only)
Only use attachments/accessories supplied by Bitmore or those certified by your device manufacturer.
This product is not a toy
Only re-charge this device using to a USB port wall adapter (not included). – please use a genuine certified
one as can be found by your device manufacturer.
DO NOT use a wall adaptor with a fast charge or high AMP output.
DO NOT re-charge via USB port on a computer
When you are not using the LED Pulse for prolonged periods of time, please charge it every 3 months to avoid
damaging the battery.
DO NOT leave the LED Pulse charging over night or unattended.
DO ensure close supervision when the LED Pulse is used near children.
DO NOT use faulty, damaged or none certified (by your device manufacturer) cables or plugs to charge or
discharge the LED Pulse or your devices.
DO NOT use a plug with more than a 5W output.
DO NOT operate the LED Pulse where aerosols are or have recently been used or where oxygen is
being administered.
DO NOT operate in a closed environment such as a pocket, handbag, backpack, under a pillow etc.
NOTE:
Failure to follow the instructions in this manual will result in the guarantee being void.
Please take extra care when insert the cable into your devices or means of charging to avoid damaging the ports.
Devices connected to this product are not covered by the Bitmore guarantee.
BM-BT5WEC LED PULSE | 3
To Next Page
Loading...