BIXOLON SPP-R200II Command Manual

SPP-R200II Command Manual
Rev. 1.00 BIXOLON
- 52 -
GS ( F
Function:
Set black mark control functions
Code:
None
Range:
None
Default:
None
Description:
■ This command performs various functions to control the black mark(BM) paper as follows:
m
Format
Function
2
GS ( F pL pH m a nL nH
Sets the paper feed amount to adjust the paper cutting position after
sensing BM.
112
GS ( F pL pH m aL aH bL bH
Specifies the black mark paper format.
• pL, pH specifies (pL + (pH ×256)) as the number of bytes after pH (m and [parameter]).
Remarks:
■ This command is effective only when the BM(black mark) sensor is enabled.
■ This command is stored in the receive buffer and processed in FIFO so that the delay in execution of this command
might be occurred.
Differences:
None

BIXOLON SPP-R200II Specifications

General

Type	Mobile printer
Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Compatible operating systems	Windows XP/Vista/Server 2003/2008/7/8\\r OPOS\\r Linux CUPS
Flash memory	32 MB
Internal memory	64 MB
Built-in barcodes	1D, 2D, CODABAR (NW-7), Code 128 (A/B/C), Code 39, Code 93, EAN13, EAN8, ITF, MaxiCode, PDF417, QR Code, UPC-A, UPC-E
Maximum printing width	50 mm
USB port	Yes
Serial ports quantity	1
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired
Dimensions (WxDxH)	79.5 x 43.6 x 126.7 mm
Storage temperature (T-T)	-30 - 70 °C
Operating temperature (T-T)	-15 - 50 °C
Operating relative humidity (H-H)	10 - 80 %
Ethernet LAN	No
Battery voltage	7.4 V
Power source type	Battery
Battery life (max)	6.2 h