Need help?Do you have a question about the BIXOLON SLP-DX220 and is the answer not in the manual?
Warning against multi-outlets, wet plugs, and using the supplied adapter.
Precautions on pulling cables and keeping plastic bags from children.
Actions for smoke/odor, avoiding water/foreign objects, and using in order.
Do not disassemble; do not use if out of order.
Step-by-step guide to connect the power adapter and cord to the printer.
Details connecting RS-232C and USB B-Type cables to the printer.
Explains how to connect LAN, USB A-Type (WLAN Dongle), and USB B-Type cables.
Instructions on opening cover, inserting roll, adjusting guides, and closing.
Guide on how to initiate a self-test to check printer functionality.
Lists functions available through the Unified Label Utility-II, like communication settings.
Explains the purpose of sensor sensitivity adjustment and paper length measurement.
Scenarios requiring media calibration, like initial setup or new paper types.
Lists the four methods: Smart Media Detection, Auto Calibration, Manual Calibration.
Describes the automatic detection of gaps/black marks without separate settings.
Procedure to run Gap Sensor Auto Calibration using LED sequences.
Instructions for running Black Mark Sensor Auto Calibration via LED sequences.
Warning against multi-outlets, wet plugs, and using the supplied adapter.
Precautions on pulling cables and keeping plastic bags from children.
Actions for smoke/odor, avoiding water/foreign objects, and using in order.
Do not disassemble; do not use if out of order.
Step-by-step guide to connect the power adapter and cord to the printer.
Details connecting RS-232C and USB B-Type cables to the printer.
Explains how to connect LAN, USB A-Type (WLAN Dongle), and USB B-Type cables.
Instructions on opening cover, inserting roll, adjusting guides, and closing.
Guide on how to initiate a self-test to check printer functionality.
Lists functions available through the Unified Label Utility-II, like communication settings.
Explains the purpose of sensor sensitivity adjustment and paper length measurement.
Scenarios requiring media calibration, like initial setup or new paper types.
Lists the four methods: Smart Media Detection, Auto Calibration, Manual Calibration.
Describes the automatic detection of gaps/black marks without separate settings.
Procedure to run Gap Sensor Auto Calibration using LED sequences.
Instructions for running Black Mark Sensor Auto Calibration via LED sequences.
General| Color | No |
|---|---|
| Printing colors | Black |
| Print technology | Direct thermal |
| Maximum resolution | 203 x 203 DPI |
| Maximum print height | 2000 mm |
| Maximum printing width | 54 mm |
| Flash memory | 128 MB |
| Internal memory | 64 MB |
| Built-in barcodes | 1D, 2D, AZTECCODE, CODABAR (NW-7), Code 11, Code 39, Code 93, Code-128 Codabar Library, Data Matrix, EAN13, EAN8, GS1 DataBar, IMB, Industrial 2/5, Interleaved 2/5, MicroPDF417, PDF417, POSTNET, QR Code, TLC39, UPC-A, UPC-E |
| Page description languages | BPL |
| Display | - |
| Product color | Gray |
| USB port | Yes |
| USB 2.0 ports quantity | 1 |
| Media thickness | 0.06 - 0.20 mm |
| Maximum roll diameter | 130 mm |
| Supported paper width | 15 - 60 mm |
| Sustainability certificates | ENERGY STAR |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Storage temperature (T-T) | 10 - 90 °C |
| Operating temperature (T-T) | 10 - 80 °C |
| Storage relative humidity (H-H) | -20 - 60 % |
| Operating relative humidity (H-H) | 0 - 40 % |
| Harmonized System (HS) code | 84433210 |
Weight and Dimensions| Depth | 230 mm |
|---|---|
| Width | 120 mm |
| Height | 170 mm |
| Weight | 1360 g |
To Next Page
