EasyManua.ls Logo

BIXOLON SRP-275 - User Manual

BIXOLON SRP-275
39 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
User's Manual
SRP-275 Ver.2
Impact Printer
Rev. 2.00
http://www.bixolon.com

Table of Contents

Other manuals for BIXOLON SRP-275

Preview: Driver Users Manual
Driver Users Manual16 pages
Preview: Driver Manual
Driver Manual31 pages
Preview: Installation Guide
Installation Guide8 pages
Preview: Specifications
Specifications2 pages

Questions and Answers

  • S
    Shawn ShepherdJul 26, 2025
    What to do if my BIXOLON SRP-275 does not start printing?
    • J
      joshua66Jul 26, 2025
      If your BIXOLON Printer isn't starting, ensure it's powered on and the power supply cable is correctly plugged into both the printer and the power outlet. Wait for the light to stop blinking, indicating the printer is ready. Also, verify that the covers are closed, check the paper status, and ensure there are no errors. If an error exists, turn the printer off for a few seconds, then turn it back on. Finally, check the paper roll inside the printer.
  • J
    Jorge PerryAug 2, 2025
    Why does my BIXOLON SRP-275 stop printing?
    • B
      bmercadoAug 2, 2025
      If your BIXOLON printer stops printing, check that the covers are closed, verify the paper status, and ensure there are no paper jams. If there is an error, turn the printer off for a few seconds and then turn it back on.
  • D
    durandeniseAug 9, 2025
    How to check the operation of the BIXOLON Printer by itself?
    • M
      Molly WaltersAug 9, 2025
      To check the operation of your BIXOLON printer, try running a self-test to ensure it works properly. Also, check the connection at both ends of the interface cable between the printer and the computer. Ensure that the printer’s DIP Switch settings for data transmission match the computer’s settings.
  • D
    danielcunninghamAug 18, 2025
    What does the ERROR LED blinking pattern mean on my BIXOLON Printer?
    • H
      htuckerAug 18, 2025
      The ERROR LED blinking pattern indicates that the rear cover is open or the print head is too hot. The printer recovers automatically when the rear cover is closed or when the print head cools down.

Summary

Safety Precautions

WARNING

Violating instructions can cause serious injury or death.

CAUTION

Violating instructions can cause slight wound or damage the appliance.

EMC and Safety Standards

CE Marking Compliance

Printer conforms to relevant directives and norms.

Setting Up the Printer

Operation Panel Overview

Connecting Cables

AC Adaptor Connection

Step-by-step guide for power adapter connection.

Interface and Drawer Kick-out Cables

Procedures for connecting communication and drawer cables.

Setting the Switches

DIP Switch Overview

Overview and function of DIP switches.

DIP Switch Settings

Citizen Mode DIP Switch Configuration

Star Mode DIP Switch Configuration

Changing DIP Switch Settings

Memory Switch Settings

Memory Switch 2 Configuration

Memory Switch 8 Settings

Memory Switch Setup Mode

Procedure to Start Setup Mode

Memory Switch Setting Procedure

Memory Switch Setting for Star Mode

Memory Switch 0 Functions

Memory Switch Functions

Memory Switch 1 Settings

Memory Switch 3 Settings

Memory Switch 4 Settings

Memory Switch 2 Settings

Memory Switch 5 Settings

Memory Switch 6 Settings

Memory Switch 7 Settings

Ribbon Cassette Installation

Roll Paper Installation

Printer Self Test

Running the Self Test

Instructions on how to perform the printer's self-test.

Hexadecimal Dumping Feature

Using the Hexadecimal Dump

Appendix - Troubleshooting

ERROR LED Blinking Patterns

Interpretation of LED error codes and their meanings.

Impossible to Recover Errors

Description of errors that cannot be resolved by the user.

Printer Interruption Troubleshooting

Steps to resolve printing interruptions or jams.

Automatically Recoverable Errors

Description of errors that self-correct upon condition removal.

Printer Startup Troubleshooting

Troubleshooting steps for startup failures.

Checking Printer Operation

Guide to verifying printer functionality via self-test.

Recoverable Errors

Description of errors requiring external action for recovery.

Poor Printing Quality Troubleshooting

Troubleshooting steps for issues with print quality.

BIXOLON SRP-275 Specifications

General IconGeneral
BrandBIXOLON
ModelSRP-275
CategoryPrinter
LanguageEnglish

Related product manuals