To Next Page
S
Shawn ShepherdJul 26, 2025
What to do if my BIXOLON SRP-275 does not start printing?
- Jjoshua66Jul 26, 2025
If your BIXOLON Printer isn't starting, ensure it's powered on and the power supply cable is correctly plugged into both the printer and the power outlet. Wait for the light to stop blinking, indicating the printer is ready. Also, verify that the covers are closed, check the paper status, and ensure there are no errors. If an error exists, turn the printer off for a few seconds, then turn it back on. Finally, check the paper roll inside the printer.
General
