SRP-275
Rev. 1.00
- 23 -
5. Detailed Windows Driver Settings
The following functions can be set in detail after the Windows Driver installation is
complete.
5-1 Paper Supply Method
The printer structure is such that the print head, which carries out printing, and the cutter,
which cuts the printing paper, are separated. After printing, the location of the end section
can be adjusted as follows.
- Automatically Select: Select the “Receipt” automatically.
- Receipt: Printed text is transferred up to the cutter (manual cutter).
- Receipt [No feed]: Printed text is transferred up to the next line only.
(minimum transfer: 0x0A).
- Form: For long print jobs, printed text is transferred according to the Receipt option per
selected paper size.
Detailed setting can be done as follows.
1) Open the printer properties window in the Windows OS.
To Next Page
Loading...
Need help?
General
