Why is my BIXOLON printer not starting to print?
If your BIXOLON printer does not start printing, ensure it is turned on and that the power supply cable is correctly plugged into both the printer and the power outlet. Verify that all covers are closed, and the paper is properly loaded.
What to do if I get a BIXOLON Srp-275III Printer rear cover open error?
The BIXOLON printer rear cover open error recovers automatically once the rear cover is properly closed.
What to do for a BIXOLON printer print head temperature error?
If your BIXOLON printer displays a print head temperature error, it will automatically recover once the print head cools down.
General| Ethernet LAN | No |
|---|---|
| USB port | Yes |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Connectivity technology | Wired |
| Parallel ports quantity | 1 |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 10 - 90 % |
| Operating relative humidity (H-H) | 10 - 80 % |
| Product color | Gray |
| Type | POS printer |
| Print speed | 5.1 lps |
| Print technology | Dot matrix |
| Maximum resolution | 80 x 144 DPI |
| Flash memory | 16 MB |
| Internal memory | 64 MB |
| Built-in sensors details | Paper End, Paper Near End, Wall Mounting Paper Near End, Rear Cover Open, Black Mark |
| Media thickness | 0.06 - 0.085 mm |
| Maximum roll diameter | 83 mm |
| Supported paper width | 76.5 mm |
| Maximum printing width | 63.5 mm |
| Power source type | AC |
| Mobile operating systems supported | Android, iOS |
| Harmonized System (HS) code | 84433210 |
Weight and Dimensions| Depth | 239 mm |
|---|---|
| Width | 160 mm |
| Height | 157 mm |
Details the items included in the printer box and advises on checking for damage or missing components.
Provides recommendations for selecting a suitable operating environment, avoiding heat, moisture, and vibration.
Step-by-step guide on how to properly connect the AC adapter and power cord to the printer and power outlet.
Details the procedure for connecting interface cables (Serial, Parallel, USB, Ethernet) and the drawer kick-out cable.
Details the functions of DIP Switch 1 and DIP Switch 2 for RS232C and Parallel interfaces.
Details settings for Memory Switch 8 (font, buzzer) and serial communication parameters like baud rate and handshake.
Details the steps for initiating the self-test, including button presses and power cycles, to diagnose printer operation.
Provides step-by-step instructions on how to activate and use the hexadecimal dump mode to view printer data.
Details the printer's printing method, speed, characters per line, font types, and character sets.
Specifies paper type, roll width, diameter, thickness, weight, and core diameter requirements for the printer.
Outlines the standard ribbon cassette, its color, size, and estimated life for both black and red printing.
Explains the meaning of different ERROR LED blinking patterns and their corresponding recovery procedures.
To Next Page
