BIXOLON Srp-275III User Manual

Rev. 1.01
- 24 -
SRP-275III
- Memory Switch 1
Bit
Function
0
1
F~5
Reserved
Fixed to Off
E~5
4
Zero style
Normal
Slash zero
3~0
International Characters (*1)
Refer to the following table
NOTES
(*1) International Characters Default Value Settings
MSW1-3
MSW1-2
MSW1-1
MSW1-0
International Characters
0
0
0
0
U.S.A
0
0
0
1
France
0
0
1
0
Germany
0
0
1
1
U.K.
0
1
0
0
Denmark1
0
1
0
1
Sweden
0
1
1
0
Italy
0
1
1
1
Spain1
1
0
0
0
Japan
1
0
0
1
Norway
1
0
1
0
Denmark2
1
0
1
1
PC-999
- Memory Switch 2
Bit
Function
0
1
F
Reserved
Fixed to Off
E
How to recover to print ready after inserting paper
Press FEED.
Auto-recovery
D~4
Reserved
Fixed to Off
3
Contextual auto-cut function (*1)
Disabled
Enabled
2
1~0
Near end switch function (*2)
Refer to the following table
NOTES
(*1) Contextual Auto-cut Function
This function auto-cuts paper when a paper feed command that feeds continuously over
7/6 inch.
Hosts that cannot send an escape sequence, such as <ESC> “d” 0 can cut paper if a 1/6
inch line feed code <LF> is sent seven times.
(*2) Near end switch Function
When an near end switch is mounted, settings should abide by those shown in the table
below.
MSW 2-1
MSW 2-0
Near end switch Function
0
0
Disabled
0
1
Disabled
1
0
Reflects the near end switch state to the status.
Printing does not stop for near end, and the printer does not go offline.
1
1
Reflects the near end switch state to the status.
Printing does stop for near end, and the printer goes offline.

BIXOLON Srp-275III Specifications

General

Ethernet LAN	No
USB port	Yes
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired
Parallel ports quantity	1
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	10 - 80 %
Product color	Gray
Type	POS printer
Print speed	5.1 lps
Print technology	Dot matrix
Maximum resolution	80 x 144 DPI
Flash memory	16 MB
Internal memory	64 MB
Built-in sensors details	Paper End, Paper Near End, Wall Mounting Paper Near End, Rear Cover Open, Black Mark
Media thickness	0.06 - 0.085 mm
Maximum roll diameter	83 mm
Supported paper width	76.5 mm
Maximum printing width	63.5 mm
Power source type	AC
Mobile operating systems supported	Android, iOS
Harmonized System (HS) code	84433210

Weight and Dimensions

Depth	239 mm
Width	160 mm
Height	157 mm