1) Insert the battery into the quad battery
charger as shown in the figure on the
left.
2) Gently slide the battery until it reaches
the bottom of the charger.
3) Charging starts as soon as the battery
is completely inserted.
4) After charging, remove the battery from
the quad battery charger.
NOTE
Battery charging status descriptions are as follows.
Error
Replace or Reinstall Battery
CAUTION
1. If the red lamp of the charger blinks, install the battery again.
2. If the red lamp continues to blink despite several attempts (4 ~ 5 times) to
install the battery, contact your local dealer.
3. The charging time may vary depending on the type of the charger or ambient temperature.
To Next Page
Loading...
Need help?
General
