BIXOLON SPP-R400II Reference Guide

POS/Mobile Printer
Rev. 1.00
- 40 -
3-28 SetVerticalPositionInPM
Set the vertical position for printing in the Page Mode.
int SetVerticalPositionInPM (long position, bool relative)
[Parameters]
* long position
[in] Starting position to be set
* bool relative
[in] Set whether it is relative or absolute position from the current position.
If TRUE, it is set to relative position.
[Return Values]
Constant
Value
Description
SUCCESS
0
The function is successful.
WRITE_ERROR
-105
Data transmission failed.
BAD_ARGUMENT
-117
The specified argument is not correct.
NOT_SUPPORT
-124
The function is not supported.
* Example
ConnectToPrinter(………..);
……
// Select Page Mode
if (SelectPageMode(true) != SUCCESS)
return;
SetPrintAreaInPM(0, 0, 416, 416);
SetPrintDirectionInPM(PAGEMODE_ROTATE_90);
SetVerticalPositionInPM(160, false);
SetHorizontalPositionInPM(40);
PrintText(“Bixolon Printer.”, ALIGNMENT_CENTER, ATTR_FONTTYPE_A,
TS_WIDTH_0 | TS_HEIGHT_0);
……
PrintDataInPM();

BIXOLON SPP-R400II Specifications

General

Printer Type	Mobile Printer
Print Method	Direct Thermal
Resolution	203 dpi
Connectivity	Bluetooth, USB, Serial
Media Type	Thermal paper
Emulation	ESC/POS
Weight	0.5 kg
Roll Diameter	40 mm
Operating Temperature	0 to 50 °C
Drop Resistance	1.2 m (4 ft)
Paper Thickness	0.06 to 0.08 mm
Power Supply	Rechargeable Li-ion Battery