BIXOLON SPP-R400II Windows Driver Manual

SPP-R400
Rev. 1.03
- 30 -
5-2-1 Send Commands
The Windows driver serves to receive the content for print from an application and send it
to the printer. The “Send Commands” function allows for the addition of desired commands
at the start or end of the print content.
Start Doc
:
Addition of command at the beginning of the document.
Start Page
:
Addition of command at the beginning of the page.
End Page
:
Addition of command at the end of the page.
End Doc
:
Addition of command at the end of the document.
For more information on the hexadecimals that can be entered in “Start Doc”, “Start Page”,
“End Page” and “End Doc”, refer to the Control Commands Manual.
5-2-2 Line Feed
Enter a number between 0 and 99 for adding blank lines at the end of printing.
5-2-3 Form Feed
Enter a number between 0 and 99 for adding the form feed command (0x0c) at the end of
printing.

BIXOLON SPP-R400II Specifications

General

Printer Type	Mobile Printer
Print Method	Direct Thermal
Resolution	203 dpi
Connectivity	Bluetooth, USB, Serial
Media Type	Thermal paper
Emulation	ESC/POS
Weight	0.5 kg
Roll Diameter	40 mm
Operating Temperature	0 to 50 °C
Drop Resistance	1.2 m (4 ft)
Paper Thickness	0.06 to 0.08 mm
Power Supply	Rechargeable Li-ion Battery