Presettings for labeling
Operating instructions GLP
3 -- 54
6.562.98.5.01.18
3.4.5 Printing the product group total
A certain product group total may only be printed if the product group numbers
are created and stored under the PLU data of the articles.
The price, weight and piece totals of the articles of a product group labeled are
then printed as the product group total.
If no product group number is defined, the price, weight and number of all arti-
cles are totalized on the product group ”0” and printed when this function is called
without the input of a product group number.
Operating sequence: Description
------------------------------------------------------------------------------------------------------------------------------------------------------
[MODE] 2
Release
total
Pr.group
total
-- Print the group total.
The following display appears:
OK <ENTER>
Cancel<ESC>
Pr. group number
0
[ENTER] -- Acknowledge displayed product group number 0, if the total of
all articles is to be printed.
xx [ENTER] -- or enter the corresponding product group number and ack-
nowledge, if the total of a certain product group is to be printed.
-- Remove the total label.
Label example
Total type **PG**
Number of packages
Weight total
labeled
Total symbol
Price total
Product group number
Clearing the product group total
The presetting ”With” or ”Without” delete after printout of the product group total
is set at mode level 5.
3
To Next Page
Loading...
