Overview of equipment
Operating instructions GLP
1 -- 10
6.562.98.5.01.18
1.2.2 Labeler GLP--W with load receptor and operating unit GT 240
1.2.2.1 Description
With the license “GLP_PRICE_LABEL” provided and a load receptor connected,
the labeler GLP--W 80 or GLP--W 160 may be used for labeling of weight--variable
packages. Without a load receptor connected, they are suitable for labeling of
fixed price, fixed weight or fixed value packages.
The labeler GLP--W 80 or GLP--W 160 comprises the following components:
-- Labeler GLP--W 80/160 with thermal or thermal transfer label printer for up
to 80 or 160 mm wide labels, supply roll with self--adhesive labels and integra-
ted tape winder for the backing paper
-- operating terminal GT 240 with LC display and membrane keyboard
-- optional with operating terminal GT--CT with touch screens
-- load receptor with weighing range and scale interval in relation to the order
specification
The printed labels may be optionally processed as follows:
-- individual removal of printed labels from the backing paper
-- ejecting backing paper with printed labels
-- with an optional cutting device provided, cutting of labels from ticket tape or
backing paper between the labels (no cutting of labels)
-- with the optional Bizerba cutting device it is possible to cut Linerless labels.
The cut label is manually applied to the package.
1.2.2.2 Labeler GLP--W with terminal GT--CT
If the terminal GT--CT is connected to the GLP (see below) it is possible to perform
a weight class-- related labeling of the articles, and if required, an additional stati-
stic evaluation (see sec. 2.8 from page 2 -- 26).
1.2.2.3 View GLP--W 160
1.2
GT 240
Load receptor
Operating terminal
GT--CT
Operating terminal
(Optional)
Plug location for
memory card
Operating
keys
Label
removal
Tiltable cover above
printer and label roll
To Next Page
Loading...
