Display and operation
Operating instructions GLP
1 -- 24
6.562.98.5.01.18
1.4.1.2 Describing the GT 240 keyboard
A GT 240 operating terminal which might be connected to the printer uses the
membrane keyboard as shown below. It serves to call all functions, enter values
and texts and operate the unit. For some countries, a keyboard with Cyrillic, East--
European or Greek character sets may be installed.
The keys are subdivided into four differently coloured function groups:
Blue menu and cursor keys (see section. 1.4.1.4, page 1 -- 25)
Green function keys (see section 1.4.1.5 page 1 -- 25)
Dark grey alpha keys for entering text and direct PLU keys (see page 1 -- 27)
Light grey 10--digit keyboard for entering values (see page 1 -- 27)
1.4.1.3 Describing the function keys on GLP printer
The following operating keys and pilot lamps are located on the front side of the
GLP printer.
Start label printing
Blank label
Stop printing of a label
sequence
Printer On
Empty label roll
Error
Pause key
Reserve
Pause
Memocard
Reset, input
1.4
To Next Page
Loading...
