Need help?Do you have a question about the BK Medical Flex Focus 200 and is the answer not in the manual?
General| Weight | < 5 kg (11 lbs) without transducers |
|---|---|
| Transducer Compatibility | BK Medical transducers |
| Type | Portable Ultrasound System |
| Portability | Portable |
| Power Requirements | 100-240 VAC, 50/60 Hz |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Display | 10.4 inch LCD |
| Category | Ultrasound System |
| Applications | Urology |
| Imaging Modes | B-Mode, M-Mode, Color Doppler, Power Doppler |
| Application | Urological |
Covers safety aspects, warnings, and symbols for the ultrasound system.
Provides an overview of the system's configuration and components.
Details the various input and output connectors on the system.
Explains the system's board revision and naming conventions.
Lists tools and equipment required for specific procedures.
Explains the purpose and scope of the checking procedure.
Outlines initial visual and functional checks for the system.
Describes how to test various functions of the ultrasound scanner.
Introduces the troubleshooting section and safety precautions.
Lists components that can be replaced and actions required.
Provides hints for diagnosing and solving specific issues.
Details how to enter and use the system's service mode.
Guide on replacing the core board and necessary post-replacement steps.
Procedure for replacing the flat panel assembly.
Information on accessing BIOS and installing system images.
Explains HIPAA requirements for patient data privacy.
Lists default usernames, passwords, and references.
Configuration steps for DICOM features and network setup.
Steps to recover the main database after a crash.
Procedure for recovering the patient database.
Instructions on how to obtain system log files for support.
Guide to configure the scanner for external storage.
Describes the directory structure and important files on the hard disk.
Explains how software options are controlled by licenses.
Details how to configure and enable video outputs.
States that components are factory adjusted and not to attempt further adjustments.
Instructions for adjusting the trackball's friction.
How to adjust the monitor's brightness and reset to factory settings.
Step-by-step guide for calibrating the touch screen.
Detailed steps for disassembling and reassembling system components.
Provides diagrams and lists of parts for the scanning unit and docking units.
Explains the purpose and schedule of preventative maintenance.
Lists equipment and parts required for preventative maintenance.
Outlines the steps and checks for performing preventative maintenance.
Describes the theory of operation and block diagrams of the system.
Provides an overview of the system's units, boards, and software.
Explains the physical view and functional blocks of the engine.
Details the core board's functional blocks and interfaces.
Describes the TMUX board's function and connections.
Explains the front end's capabilities and interfaces.
Illustrates the keyboard functions and their control via USB HUB.
Details the specifications and placement of the power supply.
Explains how signals flow internally and to external equipment.
Visual diagram showing PCB and external cable connections.
Describes external multi-pin connectors like USB, LAN, Video, and DVI.
To Next Page