Need help?Do you have a question about the BK Medical Flex Focus 500 and is the answer not in the manual?
General| Brand | BK Medical |
|---|---|
| Model | Flex Focus 500 |
| Category | Diagnostic Equipment |
| Language | English |
Details on safety aspects for the 1202 System.
Defines terms and safety symbols used in the manual.
Provides critical warnings and cautions for safe operation and maintenance.
Details the different modules and their part numbers.
Details testers and adapters required for electrical safety testing.
Ensures correct mains connection before powering on the system.
Provides common problem symptoms and initial troubleshooting steps.
Instructions on entering and using the service mode.
Detailed steps to enter the scanner's service mode.
Procedure to exit service mode and return to normal console operation.
Procedure for replacing the core board and reprogramming serial numbers.
Procedure for replacing the flat panel and transferring calibration data.
Overview of installing the XP Embedded image, including BIOS access.
Steps to access the system's BIOS setup menu.
Configuration for DICOM features, network setup, and AE Title.
Steps to recover the main database after corruption.
Procedure to recover the patient database and its tool.
Details on using the Patient Database Recovery tool.
Procedure for adjusting and calibrating the touch screen.
Step-by-step procedures for disassembling and reassembling the scanner.
Procedure for removing the front frame of the scanner.
Steps to safely disconnect the scanner unit from its dock.
Procedure for removing the flat panel display.
Procedure to remove the main electronic assembly from the scanner.
Procedure for removing the system's hard disk drive.
Procedure for removing the high-speed data cable.
Procedure for removing the DVD drive.
Procedure for removing the keyboard from the keyboard dock.
Procedure for removing the transducer holder.
Procedure for removing the power supply from the keyboard dock.
Procedure for removing the track pad from the touch dock.
Procedure for removing the battery box.
Provides an exploded diagram and a list of all parts.
To Next Page