BK Precision 8601 - Page 44

44
Command Syntax
[SOURce:]INPut[:STATe] <bool>
Parameters
0 | 1 | OFF | ON
*RST Value
OFF
Examples
INP 1
Query Syntax
INPut[:STATe]?
Returned Parameters
0 | 1
Related Commands
*RCL *SAV
[SOURce:]INPut:SHORt
Command Syntax
[SOURce:]INPut:SHORt[:STATe] <bool>
Parameters
0 | 1 | OFF | ON
*RST Value
OFF
Examples
INP:SHOR 1
Query Syntax
INPut:SHORt:STATe?
Returned Parameters
0 | 1
Related Commands
INP
[SOURce:]REMote:SENSe
This command is used to select the remote measure mode for the load.
Command Syntax
[SOURce:]REMote:SENSe[:STATe] <bool>
Parameters
0 | 1 | OFF | ON
*RST Value
0
Examples
REM:SENS 0
Query Syntax
[SOURce:]REMote:SENSe[:STATe]?
Returned Parameters
<CRD>
[SOURce:]FUNCtion
This command selects the input regulation mode of the electronic load.
CURRent constant current mode
RESistance constant resistance mode
VOLTage constant voltage mode
POWer constant power mode