71
:AVERage
:COUNt <n> Set filter count (1 to 100). 8
:COUNt? Query filter count.
MEASure, FETch Command Summary
Commands Description Default
:MEASure
:VOLTage
:CURRent
:FETch
:VOLTage
:CURRent
:POWer? Fetch the last measured power
TRIGger Command Summary
Commands Description Default
:TRIGger Path to program trigger layer.
[:IMMediate] Generates a trigger signal.
:TIMer <NRf> Set timer interval (0.01 to 999.99sec). 0.1
:TIMer? Query the programmed timer interval.
SYSTem Command Summary
Commands Description Default
:SYSTem
:PRESet Return to :SYST:PRESet defaults.
:POSetup <name> Select power-on setup: (RST or SAV0). RST
:POSetup? Query power-on setup.
:VERsion? Query rev level of SCPI standard.
To Next Page
Loading...
