Need help?Do you have a question about the BK Precision XXLS400 and is the answer not in the manual?
General| Driver Size | 10" (254 mm) |
|---|---|
| Amplifier Power | 400 Watts RMS |
| Frequency Response | 20 Hz - 200 Hz |
| Enclosure Type | Bass Reflex |
| Type | Powered Subwoofer |
| Inputs | RCA |
| Phase Switch | 0 / 180 degrees |
Explains connecting the subwoofer to an amplifier using the high-level input via Neutrik Speakon.
Explains connecting the subwoofer to a processor or pre-amp using RCA connectors.
High Level Neutrik and Low Level RCA input connectors for audio signals.
Adjusts the signal level for both high and low level inputs to match system volume.
Filter bypass, frequency contour, and phase adjustment for signal integration.
Power switch and IEC mains input connector with fuse drawer.
To Next Page
