Need help?Do you have a question about the BK Radio DMH 5992 and is the answer not in the manual?
Provides essential safety guidelines for operating the radio, including proximity to blasting caps and explosive atmospheres.
Instructions for safe usage and RF energy awareness for occupational/controlled environments.
Details compliance with national and international RF exposure standards for occupational use.
Provides guidelines for transmitting no more than 50% of the time and maintaining safe distance.
Step-by-step guide for turning on the radio, setting volume, and selecting channels.
Explains how to use the PTT switch for transmitting and potential issues.
Explains how Channel Guard allows selective calling within a system.
Steps for monitoring and transmitting on Channel Guard channels.
Details how the radio operates in analog (wide/narrow) and APCO Project 25 Digital modes.
Covers secure communication options for digital mode, including encryption.
Explains how to select encryption keys (DES or AES) for secure communication.
Provides a method to panic-zeroize all encryption keys and reset passwords.
Lists functions assignable to front panel and microphone FCN key.
Enables secure transmission on channels programmed for switchable secure operation.
Describes transmitting on the selected channel while scan is active.
Enables receiving on any channel while monitoring designated priority channels.
Designates up to two priority channels (PR1, PR2) for periodic testing within a group.
Uses P25 Unit IDs for direct calls in Digital Mode; microphone's [*] key must be enabled.
Disables scanning; radio receives/transmits on RTX channel; periodic beep alerts user.
Allows entering Unit-to-Unit Mode and transmitting to the received ID before hold time expires.
Procedure for initiating an emergency call, disabling scanning and priority scanning.
Allows user to override lockout by pressing CG button to disable receive Channel Guard.
To Next Page
General
