To Next PageTo Next Page
Need help?Do you have a question about the BK TECHNOLOGIES BKR9000 and is the answer not in the manual?
Details compliance with Canadian regulations for radio transmitters.
Crucial information on RF exposure and operational instructions for FCC compliance.
Explains the radio's liquid crystal display and its components.
Details various icons indicating radio status like signal strength and battery level.
Lists programmable buttons, switches, and their functions.
Describes how to use the knob for selecting channels or zones.
Details selecting channels or zones using the keypad.
Guides on adding channels to create a command zone.
How to hear analog channels with proper code guard values.
How to transmit using sub-audible code guards.
Monitors activity on scan list channels within the current zone.
Assigns CTCSS/CDCSS code guards from a pick list to channels.
Assigns Network Access Codes (NACs) from a pick list to channels.
Assigns Talk Group IDs from a pick list to channels.
Enables P25 Unit IDs for direct calls between radios in digital mode.
Guides on how to initiate an emergency call using a dedicated button.
How the radio behaves when an emergency call is received.
Details the necessary hardware and software for encryption.
Allows selection between encrypted and clear transmission modes.
Configuration and sending/receiving of text messages on digital channels.
Step-by-step guide to initiating and sending a text message.
Checking the availability of another radio with a specific P25 ID.
How to send inhibit/uninhibit commands using password.
Defines radio behavior when a conventional channel is busy.
Specifies conditions under which a channel is considered busy.
How control lock functions when assigned to buttons or menus.
Details methods for transmitting GPS coordinates.
Explains how to navigate programming functions using keypad buttons.
Steps to enter programming mode using password.
Assigning channels for system-wide priority monitoring.
Process for adding a new zone to the radio's configuration.
Modifying zone information such as labels and priority settings.
Assigning channels as priority for a specific zone.
Steps to add a new channel to a zone.
Modifying existing channel parameters like label, frequency, and mode.
Setting the receive frequency for a channel.
General| Battery Type | Lithium-Ion |
|---|---|
| Operating Temperature | -30°C to +60°C |
| Battery Life | Up to 12 hours |
| Intrinsically Safe | Yes |
| Display | Color LCD |
