● Automatic pairing. The simulator automatically pairs those
devices it detects nearby. In the bottom right corner you can see whether these devices are
paired:thegreencoloroftheiconindicatesthatitisconnected.
● Manual pairing. You can also pair the devices manually. To do so access the "Settings"
(top right corner) section of the simulator and disables the automatic pairing. The manual
pairingiconwillappear.
Using several trainers at the same time. You can use several trainers alongside one another as
long as each one is paired to a simulator installed on a separate PC or table. Two trainers can NOT
bepairedtothesamePCortabletsimultaneously.
Having several people use the same trainer. The trainer can be used by more than one person,
though each one must log into the simulator and website using his/her own username and
password.
2.4BKOOLandMTBBIKES
Using a mountain bike is perfectly OK, though we recommend replacing the knobby tires with slicks
toavoidexcessivenoise.
2.5UPDATES
Keep your trainer and simulator up to date. To improve your user experience Bkool continuously
updates its trainer and simulator software. Updates are free of charge. When you have the
simulatorworkingitwilltellyouthestepstofollowinordertoupgradethesoftware
2.6TROUBLESHOOTINGIF…
The simulator does not detect the trainer. Make sure the trainer is plugged in (on the Pro model,
theLEDshouldbeon).TheANT+USBmustbeconnectedtothecomputerortablet.
It does not detect a device. The device must be on. To detect your heart rate the band must be
properly fitted to the chest. For the cadence sensor to work you must be pedaling. The ANT + USB
mustbeconnectedtothecomputerortablet.
To Next Page
Loading...