Need help?Do you have a question about the BKS B-55600 Series and is the answer not in the manual?
Details the process for installing the module into timber or steel doors, including recess dimensions.
Describes the installation steps for aluminium and plastic doors, specifying cutout dimensions and mounting.
Instructions for installing the module in conjunction with the Secury (A-opener) system.
Guidance on how to route the connecting cable within the door leaf or profiles for proper installation.
Details the wiring and connection of the module using the provided system cable.
Explains the automatic pairing process for the SECUREconnect and access control module.
Steps for installing the module into standard flush boxes, including mounting frame attachment.
Instructions for mounting the module directly onto a surface using the on-wall housing.
Details the internal and external unit communication and wiring, including power and reader connections.
Explains the function of LEDs and buttons on the inside unit for status indication and operation.
Describes how to re-trigger the pairing process between the inside and outside units if hardware is replaced.
Instructions for connecting the unit to an FMIO and details its output functions.
Explains the LEDs (L1-L7) and push-button (S1) on the FMIO module for status and control.
Describes how to pair the module with the FMIO and how to reset the pairing information.
Procedure to reset the in-wall/on-wall unit to factory settings using the 'Delete' button.
Steps to restore factory settings for the fingerprint scanner using the dedicated programming device.
Instructions on how to change the default factory code using the programming device.
Sequence for deleting all previously saved user codes from the code keypad.
Procedure to change the default factory code on the code keypad using a specific input sequence.
To Next Page
General